Sprinter Engine Parts

1. Dissipate heat
The tank dissipates the heat of the cooling water by absorbing heat. Cycle the temperature to ensure the normal operation of the engine.
2. Protect the engine
When the water temperature of the engine is high, the pump is repeated to reduce the temperature of the engine. At the same time, the electric radiators can dissipate the excess heat in the engine from the engine, so that the engine speed or driving conditions can be maintained at normal temperature.

High pressure transducer is the input device of the automobile computer system, which converts the working condition information of the automobile operation, the speed, the temperature of various media, and the operation of the engine into an electrical signal to the computer, and the engine is in the best working state.

1, Used to detect the ambient temperature outside the car, the control system will determine the control mode according to the difference between the temperature outside the car and the temperature inside the car.

2, To provide the ECU outside the car room temperature signal, ECU according to the signal and the temperature signal inside the car to determine the temperature of the car to meet the needs of the car room personnel.

The brake booster hoseisis resistant to low temperature and high temperature, and the braking effect is stable. The parts used in the automobile brake system transmit the brake medium in the automobile brake to ensure that the brake force is transmitted to the automobile brake sho e or brake caliper to generate the brake force, so that the braking effect is stable.
After the fuel pump supplies oil to the engine and the brake line tubing forms a certain pressure, the remaining fuel is sent back to the oil tank through the return oil pipe, and the excess gasoline steam collected by the carbon tank is also returned to the oil tank through the return oil pipe.

The main purpose of the engine gasket full set is to replace old and worn damaged parts,complete engine maintenance.

Common rail diesel injectionA device that injects fuel into the intake pipe to enrich the mixture and improve the cold starting performance of the engine during cold starting. The cold start common rail fuel injection system is an auxiliary injector or a cold start electric valve to improve the engine's cold start performance.

Water channel for cooling water circulation in the cylinder of the automobile engine is connected with the radiator placed in the front of the car through the water pipe to form a large water circulation system. The water booster pump is installed in the upper water outlet of the engine and driven by the fan belt to draw out the hot water in the channel of the engine cylinder and enter the cold water pump. There is also a thermostat next to the drainage pump. When the car starts, the cooling water will only circulate in the engine without opening, and will not pass through the water tank. When the engine temperature reaches, it will open, the hot water in the engine will be pumped into the water tank, and the cold air in the car will blow through the water tank to take away the heat.

Petrol filter is to filter out harmful impurities and moisture in the fuel system, petrol filter protect the normal operation of the engine, and improve the engine life time. When there is no gas filter in the unit, the sulfur will react directly with water to form sulfuric acid, which will corrode the internal parts of the engine. The diesel filter element is very dirty When the fuel enters the engine cylinder, it cannot ensure the fuel is clean. Not only will the power of the car cause a serious drop, but the service life of some components will also be affected. Therefore, when viewing the color of the filter element in the diesel filter, when the universal fuel filter is obviously black, it indicates that the filter element is seriously polluted by harmful substances and needs to be replaced in time.

Through oil suction pump sends the oil to the friction parts of the engine, so that the oil circulates in the lubrication road to ensure that the engine can be lubricated well. When the engine is working, the camshaft drives the driving gear of the pump body to rotate.