IVECO Daily

A thrust washer, also referred to as thrust bearing or thrust plate, is a flat, disk-shaped bearing that facilitates rotational movement in high-load applications.

A car radiator covering serves multiple purposes in your vehicle's engine bay. It provides protection to the radiator from external elements, such as debris and road debris, preventing potential damage.

Rear bumper with integrated tail lamps and a rubber-faced guard on a 1970 AMC Ambassador
A bumper is a structure attached to or integrated with the front and rear ends of a motor vehicle, to absorb impact in a minor collision, ideally minimizing repair costs. Stiff metal bumpers appeared on automobiles as early as 1904 that had a mainly ornamental function. Numerous developments, improvements in materials and technologies, as well as greater focus on functionality for protecting vehicle components and improving safety have changed bumpers over the years. Bumpers ideally minimize height mismatches between vehicles and protect pedestrians from injury. Regulatory measures have been enacted to reduce vehicle repair costs and, more recently, impact on pedestrians.

A fog light, as the name suggests, is designed for foggy or other low-visibility conditions, such as smoke or heavy dust. They are specifically designed to penetrate in these conditions, typically placed lower on bumpers than headlights to create a clearer view of the road ahead.A transparent layer of Shadow Tinting's urethane film will reduce the chance of breakage and eliminate pitting. Protection is available for your expensive headlamps, fog lamps, turn indicators and parking lights.

A car window lifter is a device used to open and close the windows of a vehicle. It consists of two levers that are connected to a motor, which when activated, pulls and pushes the window up or down. This is usually done with either a car window lifter switch inside the vehicle, or by remote control. Car window lifters have become an important part of vehicle convenience and safety, making it easy to let fresh air into the car, as well as protecting passengers from inclement weather.

A bumper bracket is the part which keeps your bumper firmly on your car. You usually have more than one, and these metal pieces attach to the front and sides of your car’s frame. Because the brackets are responsible for keeping your bumper where it belongs, it is important to replace them after an accident.

A side-view mirror (or side mirror), also known as a door mirror and often (in the UK) called a wing mirror, is a mirror placed on the exterior of motor vehicles for the purposes of helping the driver see areas behind and to the sides of the vehicle, outside the driver's peripheral vision (in the "blind spot").
Almost all modern cars mount their side mirrors on the doors—normally at the A-pillar—rather than the wings (the portion of the body above the wheel well).
The side mirror is equipped for manual or remote vertical and horizontal adjustment so as to provide adequate coverage to drivers of differing height and seated position. Remote adjustment may be mechanical by means of bowden cables, or may be electric by means of geared motors. The mirror glass may also be electrically heated and may include electrochromic dimming to reduce glare to the driver from the headlamps of following vehicles. Increasingly, the side mirror incorporates the vehicle's turn signal repeaters. There is evidence to suggest that mirror-mounted repeaters may be more effective than repeaters mounted in the previously predominant fender side location.

A sliding door is a type of door that is mounted on or suspended from a track for the door to slide, usually horizontally and outside. It is a feature predominantly found in minibuses, buses, and vans, so as to allow a large unobstructed access to the interior for loading and unloading of passengers or cargo without the doors interfering with adjacent space.

They are responsible for transmitting the gear shifter's movement to the gearbox, allowing drivers to select gears easily and smoothly.Most gear shift cables consist of two cables that run from the shifter lever down to the transmission. One cable controls horizontal movement, while the other cable controls vertical motion. By pulling or pushing on these cables with different levels of force, you can engage different gears in your vehicle's transmission.It's important to note that not all vehicles use mechanical gear shift systems anymore. Some modern cars feature electronic transmissions that don't require physical shifting mechanisms. However, many older models still rely on traditional manual transmissions with gear shift cables.In general, gear shift cables are designed to be durable and long-lasting; however, they can become damaged or worn over time due to regular use and exposure to harsh weather conditions. In such cases, replacement is usually necessary.