Mercedes-Sprinter & VITO

Tie rod ends are a part of the steering system. Tie rods connect the spindle, on which your front wheel is mounted on one end, to the steering gear mechanism on the other end.If a tie rod end fails completely, you'll lose the ability to steer your car. The good news is that this is unlikely to happen without any of the previous symptoms.

A car hood, also referred to as a “bonnet” in some countries, is the hinged cover that rests over the engine bay of a front-engine vehicle. The car hood protects the engine and connected parts from the elements while providing easy access for repairs and maintenance.The hood (North American English) or bonnet (Commonwealth English outside Canada) is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment, or trunk (boot in Commonwealth English) on rear-engine and some mid-engine vehicles) for maintenance and repair.

A clutch kit uses weighted clutch arms, clutch springs, and/or a secondary clutch helix to change the way your CVT clutch engages. Depending on how we design the clutch, we can increase the machine's max speed, horsepower, torque, or some combination of the three.

The accelerator is also known as gas pedal. It is the pedal located on the floor on the far-right. This pedal controls the amount of gas being fed into the engine and thereby controls the speed of the vehicle. You push the accelerator with your right foot with your heel resting on the ground.

A rear bumper step, also called a bed step or tailgate step, is a small step that is mounted underneath the rear bumper of your truck. The steps are typically installed on the driver side but some models can be mounted on the passenger side of your vehicle.

The position of the glass lifter switch is usually located on the inside of the door, near the door handle, and some models of the switch may be installed on the edge of the door or the center console. The function of the main switch of the elevator: the main switch of the elevator is used to control the window lifting equipment, through which the window can be automatically lifted or manually lifted to improve the ventilation and lighting effect in the car

Bumpers absorb most of the impact during low speed collisions to help protect you, your vehicle, and passengers from more serious damage. Due to this, bumpers are considered standard safety equipment.

All sliding doors have wheels which need to turn if you lubricate the track they will slide and this will wear a flat spot in the wheel which will then damage your track. The only areas on a door that need to be lubricated are where there is metal on metal.

A rim is the cylindrical outer edge of any type of wheel that supports and seals the tyre to the wheel. In the case of a tubeless tyre, a rim ensures proper fitting between it and the tyre retaining the air inside.