IVECO Daily

Essentially, a throttle body is a device responsible for controlling the amount of air that flows into your car's engine. When you press down on the gas pedal, the throttle body opens up to allow more air to enter the engine, which also draws more fuel into the engine, and then causes the car to accelerate.

It is typically located in the centre of the prop shaft, which is a shaft that transmits power from the transmission to the rear axle. The centre bearing serves to support the prop shaft and reduce vibrations and noise that can be caused by the rotating prop shaft.

Generally, brake discs should last more than 50,000 miles on average, but a number of factors affect the lifespan. If you keep them well maintained and drive sensibly, you may be able to get up to 80,000 miles out of one set.

A brake booster, also known as a 'brake servo' or 'vacuum booster', does exactly as the name suggests, it helps to 'boost' the performance of the brakes. A brake booster makes it easier for the driver to brake by increasing the force exerted without the need for additional force applied on the foot pedal.

The engine hose pipe serves a critical role in the overall functioning of the AC system by transporting refrigerant and facilitating the cooling process. Understanding its purpose and how it works can help car owners appreciate the complexity of the AC system and the importance of proper maintenance.

The car has various components to drive safely –lights are one of them. This component has an important role, especially in supporting low-light driving activities. Not only do they illuminate dark streets, but the lights also improve visibility when it's raining heavily to signal other drivers.
A car headlamp is mounted on the front of the car to illuminate roads. Because it is on the front, it is often called a headlight. In addition, it is often called the headlight -although it is more suitable to call it a headlamp. Meanwhile, the headlight explains more about the beam of light.

How to repair a brake caliper using our repair kits.
IT IS VERY IMPORTANT that the gasket is in perfect condition. If it is deteriorated, it will leak and lose its braking. Also, if the piston does not back up properly, a rapid wear of the brake pads takes place and can produce noises.
It is very important not only to change the gasket but also all the parts that make up our kits.
The piston boot prevents dirt from entering the piston cavity.
The guide boots prevent dirt from entering the guides.
The guides are the ones allowing the caliper to glide and, therefore, the pads break the disc. Deteriorated guides produce noise and unequal wear out and tear of the pads.
The rest of the parts of our kits complement the repair of the caliper and favour the optimal use of the brakes.

In an internal combustion engine, a head gasket provides the seal between the engine block and cylinder head.
Its purpose is to seal the combustion gases within the cylinders and to avoid coolant or engine oil leaking into the cylinders.Leaks in the head gasket can cause poor engine running and/or overheating.

Car expansion tank is installed in the engine compartment of a vehicle for storing additional coolant (also known as antifreeze or cooling agent). It is often a small plastic or metal container that is connected to the vehicle’s cooling system to provide additional coolant reserve.
Functions of a car expansion tank:
1. Replenish coolant: In the case of insufficient coolant in a vehicle’s cooling system, additional coolant can be added by the expansion tank, thus ensuring normal operation of the cooling system.
2. Maintain pressure balance in the cooling system: The expansion tank is typically connected to the cooling system, and a pressure valve is used to maintain pressure balance in the cooling system. This helps prevent coolant leakage or excessive pressure.