IVECO Daily

This is where a fuel filter helps. A fuel filter is located in the fuel line to screen out contaminants such as dirt, dust, debris and rust particles from the fuel. A fuel filter protects the critical parts of the engine, by filtering out foreign particles that can potentially damage a fuel injector.

The primary purpose of an intercooler is to cool the air that the turbocharger or supercharger has compressed before it enters the engine. By cooling the air, the intercooler reduces the chances of knocking and allows for more air to be forced into the engine, which can increase power output.

The crank seal is an important part of your engine. It is usually made of metal and rubber. Its purpose is to seal the end of the crankshaft. The crank seal keeps the oil in, while keeping dirt and debris out. The experienced Field Service Engineers at Lycoming indicate that a leaking crankshaft oil seal is frequently caused by a restricted breather or an oil-slinger clearance that is too tight. The leak might also be caused by a propeller defect which places an abnormal side load on the crankshaft oil seal.

Integral to the vehicle's engine management system, the aptly named exhaust gas recirculation valve, or EGR valve for short, recirculates finely metered quantities of exhaust gas to the engine intake system for increased engine efficiency, reduced fuel consumption and lower NOx emissions.

A water pump is used to transport water from one location to another. To suck water in so that it can be expelled, a pump must be able to rapidly alter pressure within a system. How a water pump achieves this pressure change is what allows certain pumps to be more beneficial to certain applications than others.

All electric radiators from BestHeating are filled with a thermodynamic fluid called glycol, which enables them to operate with the utmost efficiency. Glycol is used because it is excellent at retaining and transferring heat, and incorporates an anti-corrosion inhibitor to prevent rusting.

An Injection Pump is the device that pumps fuel into the cylinders of a diesel engine. Traditionally, the injection pump was driven indirectly from the crankshaft by gears, chains or a toothed belt (often the timing belt) that also drives the camshaft. The lift pump is considered a low-pressure, high-volume pump. On the other hand, a high-pressure injection pump is considered a low-volume pump. The latter is needed to increase the pressure of diesel fuel to the level needed for injection.

A water pump is used to move, compress, or transfer water from a lower level to a higher one. The main purpose of a water pump is to transfer water between two points and to get rid of excess water. It is often used in construction sites, tunnels, river beds, residential buildings, etc.

Radiators work through a heat transfer process called convection. When water in the radiator is heated, the surrounding air is also heated up via convection and this hot air is then moved around the room as the air circulates. Radiator heaters are a reliable and efficient way to heat a home. They may not be as famous as they once were, but they still have many advantages. Radiator heaters are easy to install and maintain, providing consistent and even heat throughout a room